Cuprinol 5 Year Ducksback
5 year colour and weather protection for rough sawn wood
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Matt
-
Coverage The 5L can covers up to 24m2 with 1 coat or 8 fence panels. The 9L can covers up to 43m2 with 1 coat or 15 fence panels. Coverage can vary depending on application method and the condition and nature of the surface
-
Drying Time 2-4 hours (showerproof in just 1 hour). Drying times can vary depending on the nature of the surface and the weather conditions.
-
Coats 2
-
5 years protection
-
Non drip easy application
-
Water based
-
Shower proof in 1 hour
Product Description
Cuprinol 5 Year Ducksback has an advanced wax enriched, water repellent and non-drip formulation that colours and weatherproofs rough sawn sheds and fences for up to 5 years. Cuprinol 5 year Ducksback is quick drying and showerproof in 1 hour, low odour and safe to use around plants and pets.
Application Description
Stir thoroughly before use, try a test area first to ensure that colour and adhesion are acceptable. Apply 2-3 coats evenly along the grain avoiding overlaps. Allow 2-4 hours between coats under normal weather conditions. This product is wax enriched to repel water. Recoat within 2-3 days of previous coat. If a longer period elapses try a flat a test area to ensure product is not repelled, product performance will be reduced if applied to grey and weathered smooth wood. Do not apply in temperatures below 5C, in damp conditions or if rains likely before the product has dried. Please note that the colour in the tub may be different to the final shade when dry. Where a strong colour change is involved, more coats may be required. If using more than one can it is advisable to mix them together in a larger container or finish in a corner before starting a new can.
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesEnsure surfaces to be painted are clean. Remove any mould, lichen,algae or moss using an appropriate fungicidal wash
-
2. After useCleaning After Final Use- Cleaning your brushes and rollers immediately after their final use ensures they can be reused for multiple projects, saving you money and reducing waste. Cleaning- 1. Remove Excess Paint- Scrape off excess paint into container for future projects. 2. Clean with Warm, Soapy Water- Use warm, soapy water in a sealed container, such as a bucket or empty tub, to clean your brushes and rollers. 3. Rinse Thoroughly- Ensure all soap and paint residues are completely rinsed out into container. Dry Naturally- Allow brushes and rollers to dry naturally and store them in a dry, dust-free place. Allowing solids to settle- Allow the paint solids to settle at the bottom of the container. Once settled, pour the clear water into another container for reuse or disposal. Responsible Disposal- Let the remaining paint solids dry out completely and dispose of them as solid waste. Do not flush paint down the drain, including when cleaning painting tools
-
3. StoringStoring & Responsible Disposal- Do not use or store paint in extreme temperatures and protect from damp & frost. Reuse, Recycle, or Donate- Whenever possible, reuse, recycle, or donate leftover paint. Find local services at mywaste.ie or consider advertising paint locally—many good causes need it to brighten community spaces. Dispose Responsibly- Never pour paint or wastewater down drains or sinks. Follow instructions at mywaste.ie to recycle empty packs. Reuse Roller Cages- Remove sleeves and store cages in a dry, dust-free place. Dispose of Unusable Brushes and Sleeves- If brushes or sleeves cannot be cleaned or reused, dispose of them in general waste to avoid recycling issues. Paint Wash Water- Collect wash water in a container; don’t pour it into drains or on the ground. Let solids settle, pour off clear water for reuse or disposal, and let solids dry before disposing as solid waste. Do not flush paint down drains, including when cleaning tools.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator